LMT马达是一种端面配流马达。其结构特点:•先进的端面配流设计,低速转动平稳。•先进的轴密封设计,能承受高背压。•先进的配油机构设计, 具有磨损自动补偿功能。•双列圆锥滚子轴承设计能够承受较大的径向力。•多种法兰、输出轴、等安装连接形式。LMT motor is a disc valve type gerolor motor.Characteristic features:•Advanced design in disc distribution flow, which can provide improved performance at low speed.•Advanceddesign of shaft seal, which can bear higher pressure.•Advanceddistributionmechanism design, which has the automatic compensation function.•Double-rolling bearing design, whichpermit higher radial loads.•A variety of connection types of flange; Rabbet:, output shaft and oil port.
主要性能参数 Main Specification
1.**工作压力指入口**压力,连续工作压力指工作压差.
2.马达不能同时在最高压力和**转速下工作.3.在断续工作条件下,运行时间每分钟不得超过10%.4.推荐用68#抗磨液压油,粘度37-73cSt,清洁度ISO18/13.5.最高工作油温80°6.马达在满负荷工作前,应在最高工作压力的40%以下磨合1小时.7.马达允许最高背压10MPa,但建议不要超过5MPa,超过时应接外泄油管.1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure2. Motor should not work under the highest pressure and the maximum speed3. The running time should not exceed 10% under intermittent working conditions4. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.5. The Maximum working temperature is 80°6. One hour running time under 40% of maximum working pressure is recommended before full capacity working.7. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes isneeded when exceeding